Help with issue after replacing analog stick

hello there friends
i have the elite controller and had an drift issue. i have replaced the analog stick to a new and after testing it i saw that the drift got worse. the drift went 100% left.
i opened up the controller and saw that the conductive rings in the pcb are gone while i was trying to remove the old stick.i have tested with a multimeter and marked in red the ones with the issues in the attached photos. can someone please tell me how to make a new trace to where it need to go by creating a jumper?
please help me
thank in advance!

ibb. co/jgLB7tg
ibb. co/2nRDFcT