No Charging Good Boot

I originally had this switch with a 2101-0001 error code and a short on the M9 chip after a replacement I was able to get a successful boot but no charging. I then replaced the USB-C port twice, same issue. There is nothing thats shorted from what I can see. The M9 replacement also looks good. Any possible ideas for where to look?

I know the work isn’t the cleanest but im still learning. I do know the two capacitors are sligtly misaligned but from my test they seem to be fine and still pass the rest for conductivity.

If you have continuty from M92 chip pin39 and pin40( where those top left 2 cap indivisually goes to), you have to do something to separe them