Switch with water damage 5V 0a

[Moe]

Hello!

I’ve got a switch that I just cleaned up that had water damage and a shorted m92 chip, I replaced the chip and cleaned up the board. But now it’s pulling 5V and no amps, before this I was seeing nothing on the amp meter. I am not seeing any shorts near max or bq or p13. Any idea and what I should try next?

Thank you!

[coda]

inspect your soldering on m92, sounds like you have a bad connection there still. if you’re not negotiating 15v on an official charger, that is most likely your issue.