Hi , Thanks for looking at my post , I have a question for anyone who can help The component in the blue box pictured is it required to be on the board ? mine is missing and looking at another post I have identified it and can replaced , the reason I’m asking is because I have severe bottom right …

Upload your images at f. ex. at imgur.com and post the edited link _imgur.com/…

Thanks for the reply , for some reason I had imgur years ago but now it’s says unavailable in your region

Hi @jkyoho and thanks for the reply , Would this not being in place affect the stick movement ? The one I’m working on is stuck at 5 o’clock Thank you Dress

missing resistor, capacitor or through hole pad for joysticks could lead to malfunction

Hi @jkyoho thank you for your help you seen knowledgeable on this subject so if you don’t mind answering another question , Does each hold correspond to a particular movement ? flic.kr/p/2rQ2EwM

joystick movement related to the voltage output from the X and Y axis potentiometer, ranging from -1.8v to 1.8v I believe. If you have a static, non moveable direction, you better check if you have torn broken pads on the joystick when you remove the old one or broken traces around. I don’t think th…

TronicsFix

Cap on BDM-040 boards

PS5 Questions DualSense Controller

jkyoho January 3, 2026, 7:02pm 8

Bdm-030 missing capacitor need to know value DualSense Controller

I dont have BDM-030 by hand,but BDM-020 and 030 looks similar in the same area, it should be 100k ohm resistor [image]

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled