Received a console with some severe water damage. Cleaned everything I could and now the console boots to Nintendo logo and then turns off.
With a modchip installed it boots fine to Hekate where eMMC looks fine; tried booting Android and it won´t boot either so filesystem should be ok.
When powering from bench PSU console will take aroud 250mA, jump to 300 and drop down to 210~ to stay there. Over thermal, APU, MAX77621 and MAX 77620 are getting hot but I’d say within normal values.
For the record, M92 was shorted when I firstly checked and since I have no replacements in hand I’m trying to boot it with no M92 on the board.