D+, D- and VBus shorted

Hi all, how screwed am I on a scale of 1 to infinity if the 3 rails mentioned in the subject line were shorted.
I have now removed the usb-c connector and I get OL on the D+and D-rails… I know this is not ideal.
Does anyone have a soc pinot? If like to see where the D± rails enter the soc.

POS won’t boot or charge.
It’ll take max .3-.4A from the bench power supply when I try to turn it on, but then turn itself off.

And no, I was not the dimwit who didn’t fit the connector properly.


are you saying the vbus was shorted to the data lines?

Yes sir
Some animal sent the usb pins into another dimension when plugging it in