No initial boot stage, just hangs at 20mah. Only UART code 80871064, unknown. All voltages seems present at standby and power on. Correct me if I am wrong but should I get 1.8v at the SBV output near the southbridge, or 3.3v? Currently it is outputting 1.8v in standby and power on, but I could have swore it should be 3.3v
The error codes 8087xxxx are pointing towards an issue with the SSD controller chip.
1 Like
Sorry for the late reply, I just got back to this console today, changing the ssd controller did repair the console. Thank you for your help Calvin!! The 80871064 code can be resolved by replacing the ssd controller.
1 Like