Hi there! I hope someone might be able to help me out here.
I was doing a capture card mod on my New3DSLL (the japan version of XL) a year or so ago now and when I got to the step on making sure everything still worked, well it didn’t work. With the battery connected I get no reactions from the device when trying to power it on. No amber, no blue, no lights at all. If I plug it in without thr battery the amber light lights up for 5seconds then goes off. If I connect the battery and the charge it lights up amber but still does not turn on.
I believe I may have accidentally put the battery in in reverse when I was trying to test ot initially, but cannot be too certain that that was the case.
I tested the red (0.012) and the blue ( 0L and then 12.00) as labeled on that one picture that floats around from infinity (it wont let me add the picture sorry). I am not too knowledgeable with multimeters and dont know if this is right.
Does this sound like a case of one of the fuses or the chip on the daughter board for the abxy being blown or does it sound like something else is wrong along the way of doing the mod?
Thank you in advance <3