Second try on BSOD reflow/reball!

[IDCNY]

@Severence

What’s bringing you to the conclusion it patched? I’m just double checking

You should remove the jig and connect it up to your PC via USB and see if tegraRCMgui still reports the console as being in an RCM state (which would most likely suggest possible EMMC issues) trouble is, if that were to happen, you’d then be asking yourself, is it because the EMMC was

Tegra doesn’t report RCM mode without the jig. I have to manually get it to go into RCM mode, which if I understand correctly, means the eMMC is okay for now.

Okay, so these are the steps I’m planning on taking next;

1. Test to see if the SoC has normal readings
2. Visually inspect the fuel gauge and test neighboring parts (Even though this method isn’t 100% accurate, I’ll still consider changing it anyways since it’s cheap enough regardless of what I find)
3. If all else fails, I guess I could try the RAM?