Still shorted after pulling off p13usb and m92t36

So, a few days ago my Sister gave me her switch so I could fix it, I checked the caps and saw that the cap to the left of m92t36 was shorted, knowing that that most likely means the P13USB is faulty I checked the cap above it, and it was shorting too, next thing I did was pull the P13USB off, caps still shorted, then I thought maybe it’s the m92t36 after all, got it off the board, still shorting.

also maybe good to know, I was able so boot the switch a couple of times after the battery was dead, but it froze about 20mins after each time, also I had the orange screen once.

i Hope some of you can help me. :slight_smile:

Hello have you fixed thé problem ? I have thé same issue on oled p13 and m92 out of the board but still short on p13 cap. Many thanks