Switch V1 - cap missing near lcd connector

Hello everyone!

After replacing my LCD connector, I noticed that one component is missing and another looks a bit dodgy.

After a long search, I only found a few board views and part numbers: “N15619” for the small missing component and “N14630” for the large one with three pins.
Unfortunately, I can’t find any further information to help me replace them. I suspect the small component is a capacitor and the large one a diode.

Now I’ve found this board and hope to be able to revive my V1. Does anyone know what these two components are? I’d be grateful for any help.

Thank you very much!

Hello everyone!

After replacing my LCD connector, I noticed that one component is missing and another looks a bit dodgy.

After a long search, I only found a few board views and part numbers: “N15619” for the small missing component and “N14630” for the large one with three pins.
Unfortunately, I can’t find any further information to help me replace them. I suspect the small component is a capacitor and the large one a diode.

Now I’ve found this board and hope to be able to revive my V1. Does anyone know what these two components are? I’d be grateful for any help.

Thank you very much!

Unfortunately, I can’t upload my own image or insert links.

Therefore, I’ll try to describe it.

If you have the circuit board in front of you, it’s the one to the left of the bottom row of pads, towards the fan connector.

https://gbatemp.net/threads/components-used-on-the-switch-mostly-the-motherboard-and-main-console.525026/post-9467451

Measured at 2.2k ohm

Thank you so much!

ChatGPT has identified the N14630 as a ferrite bead and is absolutely certain of it. ^^