Switch working in dock but won't charge

Nintendo Questions Nintendo Switch
, ,
1

Hello again. So this is the weirdest Swich I’ve ever worked on.

At first it was charging from both sides but wouldn’t show any image when docked, black screen and green light only.

Now, after a crazy party of changing the port PI3USB, M92T36 and BQ24193 several times, it works again when docked BUT won’t charge lol

It shows the lightning besides battery percentage but it only decreases, docked or handheld.

Installed a picofly chip to load Hekate and see some info:
Battery Gauge IC info shows correct info afaik.
It does identify when a USB is pluged in, it knows whether it is PD or not and even displays a list of PD modes.
However, is listed as “Not charging”.

2

SOLVED

image
image1573×1179 235 KB

In case anyone is going thru a similar issue. Turns out I kinda effed that one resistor.
While replacing M92 several times, it was knocked out one time and I moved it again, but seems like it suffered damage and wasn’t working as intended.

Took a 100K ohm replacement from a New 3DS XL junk board I had around. If anyone needs 100K resistors this small, there are at least 3 around the screen connectors. (Nand Side)

3

It’s a 222k ohm to be exact